Services

Chemical & Basket

  • Test water for chlorine and pH each visit
  • Monitor alkalinity, conditioner level, calcium hardness, and total hardness
  • Add chemicals to balance water
  • Add algae prevention and clarifiers as necessary
  • Clean all skimmer baskets
  • Clean filter pump basket
  • Empty pool cleaner bag
  • Clean pump pot basket

Full Service

  • Test water for chlorine and pH each visit
  • Monitor alkalinity, conditioner level, calcium hardness, and total hardness
  • Add chemicals to balance water
  • Add algae prevention and clarifiers as necessary
  • Clean all skimmer baskets
  • Clean filter pump basket
  • Empty pool cleaner bag
  • Clean pump pot basket
  • Skim top of pool
  • Remove debris from bottom of pool
  • Brush pool walls, steps, and swim outs
  • Inspect pump and equipment each visit

Filter Cleaning Services

Your swimming pool needs regular filter cleaning to function properly. Our team makes it fast, easy, and affordable.

DE pool filter cleaning before and after in Clovis, CA

One-Time Water and Pool Equipment Check Up

Even the best pool equipment isn’t designed to last forever.

If you haven’t had your equipment checked in a couple of years, chances are good that there are issues with your equipment that you don’t even realize. Having these issues diagnosed and fixed before they turn into real problems can save you a lot of money, while also avoiding interruptions to regular pool usage.

That’s where we come in. Our one-time water and pool equipment check-ups can catch the most common issues with your equipment. This fast and affordable service has helped pool owners throughout Clovis and northern Fresno save tens of thousands on repairs, and you could be next.

one time pool cleaning service in Clovis

What’s Included

Automation system

Check that system is operating on all relays, that temperature is reading is normal, and that actuators are responding when activated.

Time Clock

Check that time clock is responding to manual operation. Check that motor gears are spinning and timer trippers are not loose.

Wire cover

Check that the wire safety cover is present and in good condition.

Conduits

Inspect electrical whips to and from control blocks for damage. Check to make sure equipment is bonded.

Your Content Goes Here

Main pump & secondary pump

Check to make sure that the pump is fully priming and running smoothly.

Pump baskets

Check baskets for cracks or damage.

Chiller and/or heat pump

Check for leaks and power.

Filter

Check filter and filter pressure

Valves

Check multi-port valves and/or push-pull valves for leaks. Check to make sure they spin and properly reseal.

Heater

Check for leaks, damage and pests.

Corrosion resistant check valve

Visual check.

Salt system

Check for leaks and control operation. Take salt reading if possible.

In-Lin Chlorine Feeder

Check for leaks, flow, and condition of o-ring.

UV Systems & Ozone Systems

Check for leaks, hose connection, and light.

Diverter valves & handles

check for broken safety catch tab

Jandy energy filter

check for leaks, housing damage, and gauge operation

Plumbing

Check for leaking and damage. Above ground at the equipment pad only.

Pool cleaner

Check for damage/failures, including ripped bag or broken wheel. Run pump to ensure it’s working properly.

*note: robotic cleaners are not inspected unless you specifically request it for an additional fee.

Lights

Check for basic operation. Check for signs of water in the lights.

GFCI light protection

Turn light on, trip GFCI, check for power cutting & resetting.

Skimmer lid, basket, and weir doors
Visual inspection for cracks, damage, or missing pieces.

Main drain covers in place

Visual check that there are no drain covers missing.

Let’s Get Started